IDEA1402

Amplif. 2ch. DClass, DSP, 2x400W/8, 2x700/4, Bridge: 1x1250/8, 2U/19''

The innovative IDEA series of amplifiers with integrated DSP of 2 or 4 channels combined in a double rack unit audio power and control. With a complete interface for DSP parameter management, they are the ideal choice for engineers, installers and anyone else.

It is also the ideal complement to the ARK and AIR series of loudspeakers.

The Bridge / 100V mode allows the use of amplifiers even for constant voltage lines.

The IDEA series is equipped with a 52-bit Analog Device DSP with a 48 kHz sampling cycle, with independent parameter control for each channel. Available preset files for ARK and AIR system versions.

Features:

Amplifier with DSP control 2x400 / 700 W 8/4 Ohm - 1250 W 8 Ohm / 100 V

Can be used for low impedance loudspeakers (min 4 Ohm), both for 100V constant voltage lines

Specific presets available in the appropriate download section.

Editable presets for DJs, live sound and commercial installations

Remote control with RJ45 port via ARK485UR accessory

2-unit rack design

AMPLIFIER

Channels: 2

Circuit class: digital

OUTPUT

Single channel power: 400/700W 8/4 Ohm

Bridge mode power: 1250W 8 Ohm

Constant voltage: 100V /1x1250 W

AUDIO SPECIFICATIONS

Frequency responce: 20 - 25000Hz @ 8 Ohm (±0.5 dB)

THD+N: <0.2%

Damping factor: >350

Input impedance: 20kΩ balance

Signal/Noise rate: >90dB

POWER SUPPLY STAGE

Type: Switching

Operating voltage/frequency: 220 V ±10%, 50Hz

PROTECTIONS

Input: Clip/limit, progressive volume

Output: Soft-start, short circuit, DC, overheat

FUNCTIONS

Input mode: stereo, parallel, bridge

Input sensitivity/gain: 1Vrms/1.4Vrms/32dB

INDICATORS

Indicators: 4 x LED bar - signal level and protection

DSP FEATURES

Input: 2 way mono

Digital processing: 54 bit

Sampling rate: 48 kHz

A/D - D/A Converter: 24 bit

Gain OUT: +12dB to -60dB and mute, 0.5dB steps

Delay: 3.25ms each output

Crossover Filters Slope: 12 & 24dB/octave Bessel, Butterworth, Linkwitz-Riley, Chebychev

EQ frequency: 20Hz to 20kHz, 1 Hz steps

Equalizer: 5 parametric filters for way

EQ Gain: +12dB to -12dB, 0.5dB steps

EQ width: Q da 128 a 0.42

Limiters: Adjustable threshold in 0,5dBu steps. Adjustable relase in 1 dB/s steps

Memory/Presets: 1

INPUT/OUTPUT CONNECTORS

Input signal: XLR in/out

Output signal: 4 x 4 pole out

Data: 2 x RJ-485 port

Power connection: PowerCON

PHYSICAL

Cooling: combination of heat pipe cooling system and low noise fan

Dimensions (WxHxD): 483x88x286mm

Rack unit: 2

Weight: 6.5kg

IDEA1402

Registrácia nového účtu

Už máte konto ?
Log in instead alebo Obnova hesla